Search results

The purpose of this paper is to present and discuss the external factors of the solar dryer design that influenced the thermal efficiency of the solar dryer that contribute to the better quality of dried food products.

From the reviewed works of literature, the external factors including the drying temperature, airflow rate and relative humidity have significant effects to increase the rate of moisture diffusivity of the freshly harvested products during the drying process. The proper controls of airflow rate (Q), velocity (V), relative humidity (RH%) and drying temperature (°C) can influence the dried product quality. The dehydration ratio is the procedure to measure the quality of the dried food product.

The indirect solar dryer including the mixed-mode, hybrid and integrated was found shorter in drying time and energy-intensive compared to sun drying and direct drying. The recommended drying temperature is from 35.5°C to 70°C with 1–2 m/s velocity and 20%–60% relative humidity. The optimum thermal efficiency can be reached by additional devices, including solar collectors and solar accumulators. It gives a simultaneous effect and elongated the drying temperature 8%–10% higher than ambient temperature with 34%–40% energy saving. The recommended airflow rate for drying is 0.1204 to 0.0894 kg/s. Meanwhile, an airflow rate at 0.035–0.04 kg/m2 is recommended for an optimum drying kinetic performance.

This paper discusses the influence of the external factors of the solar dryer design on the thermal performance of the solar dryer and final dried food products quality. Therefore, the findings cannot serve as a statistical generalization but should instead be viewed as the quantitative validation subjected to fundamentals of the solar dryer design process and qualitative observation of the dried food product quality.

A well-designed of solar dryer with low operating and initial fabrication cost, which is simple to operate is useful for the farmers to preserve surplus harvested crops to an acceptable and marketable foods product. The optimization of the external and internal factors can contribute to solar dryer thermal performance that later provides an organoleptic drying condition that results in good quality of dried product and better drying process. The recommended drying temperature for a drying method is between 35°C up to 70°C. Drying at 65.56°C was effective to kill microorganisms. Meanwhile, drying at 50°C consider as average drying temperature. The recommended airflow rate for drying is 0.1204 to 0.0894 kg/s. Meanwhile, air flowrate at 0.035–0.04 kg/m² is recommended for optimum drying kinetic performance. The recommended value of aspect ratio and mass flow rate is 200 to 300 for an optimum evaporation rate. The good quality of dried products and good performance of solar dryers can be developed by proper control of airflow rate (Q), velocity (V), relative humidity (RH%) and drying temperature (°C).

The proper control of the drying temperature, relative humidity and airflow rate during the drying process will influence the final dried food products in terms of shape, color, aroma, texture, rupture and nutritious value. It is crucial to control the drying parameters because over-drying caused an increment of energy cost and reduces the dry matter. The quick-drying will disturb the chemical process during fermentation to be completed.

This study identifies the potential of the solar drying method for dehydrating agricultural produces for later use with the organoleptic drying process. The organoleptic drying process can reduce mold growth by promising an effective diffusion of moisture from freshly harvested products. The research paper gives useful understandings that well-designed solar drying technology gives a significant effect on dried product quality.

This study examines the underlying relationships between the critical factors of building information modeling (BIM) implementation and the factors' groupings among architecture, engineering and construction (AEC) organizations in Saudi Arabia. The objectives of the study are to (1) identify the critical factors for BIM implementation, (2) analyze the interrelationships between the critical factors and (3) compare the critical factors between the different organizational characteristics.

First, potential factors were identified through a systematic literature review and interviews with AEC professionals. Then, a questionnaire survey was sent to AEC professionals and the collected data were analyzed using the following techniques and tests: mean score ranking, standard deviation, normalized value, factor analysis (FA), analysis of variance (ANOVA) and post-hoc Tukey test.

The analyses show that 14 factors are critical for BIM implementation in Saudi Arabia. The top critical factors include the existence of standard contracts on data security and user confidentiality, consistent views on BIM among stakeholders and the availability of guidelines for implementing BIM. Of the 14 critical factors, 9 can be grouped into 4 underlying factors: environmental, governmental, legal and organizational. The analysis shows that the criticality of the most critical factors grouped by the FA varies between different levels of BIM competency. Finally, the presence of public–private partnerships (PPPs) in realizing BIM projects is a new and emerging critical factor for BIM implementation in Saudi Arabia.

This study differs from prior works on BIM implementation in Saudi Arabia by using FA to explore the underlying relationships among factors of BIM implementation and the factors' groupings. Based on the FA results, a roadmap for implementing the BIM was developed. These findings will help to purposefully and efficiently customize BIM implementation strategies and initiatives to ensure successful BIM implementation in Saudi Arabia.

Rejecting building information modeling (BIM) can negatively impact the architectural, engineering and construction (AEC) industries. While BIM is trending globally, its implementation in post-conflict low-income economies is still limited. The purpose of this paper is to identify the critical factors for implementing BIM in a post-conflict low-income economy, using Afghanistan as a case study.

This study identifies potential affecting factors for BIM implementation through reviewing existing literature and interviewing AEC professionals in Afghanistan. Then, the factors are inserted into a questionnaire survey and disseminated with Afghanistan’s AEC practitioners. The collected data was analyzed to determine the critical factors. Also, the underlying relationships between the critical factors were established through factor analysis.

A total of 11 critical factors are affecting BIM implementation in Afghanistan. From those, nine factors can be grouped into the following three components: technological, environmental and organizational. Two factors, “cost-benefit of implementing BIM” and “market demand for BIM,” are recurring in low- and middle-income economies. Conversely, the “presence of appropriate projects to implement BIM” is the unique critical factor for Afghanistan that might affect other post-conflict low-income economies.

This study focuses on affecting factors for BIM implementation in post-conflict low-income economies, using Afghanistan as a reference rather than other types of economies that have been widely studied.

This study aims to highlight the current trends in the literature on corporate governance by applying a bibliometric review of papers on corporate governance topics published in the journal of Corporate Governance: The International Journal of Business Society (Bingley).

Bibliometric analysis is a quantitative and qualitative approach applied to bibliographic materials that highlights the core theoretical and empirical contributions to a specific research field. This analysis was based on keyword cartography, bibliometric authors’ citation analysis, bibliometric papers’ co-citation analysis, bibliometric references’ co-citation analysis, journals’ co-citation cartography and qualitative content analysis. It reviews 353 articles on corporate governance published in the journal of Corporate Governance (Bingley). Bibliometric analysis was performed using VOSviewer, and content analysis was performed using WordStat.

The results identify three major clusters: corporate governance; board of directors; and firm performance. In addition, the results reveal that the journal Corporate Governance (Bingley) has experienced increasingly important growth in research papers on corporate governance topics and citations, reflecting its significant contribution to the corporate governance research field. This study also presents recommendations for future research in this field.

The findings of this study have implications for corporate governance research, such as the impact of ownership structure and the board of directors on environmental, social and governance disclosure. To the best of the authors’ knowledge, this study is the only one to review the key corporate governance research topics on which papers published in the journal of Corporate Governance (Bingley) are focused and can be largely used for corporate governance practices.

This study provides an overview of how the literature on corporate governance research has developed, as well as a summary of the most influential authors, along with countries, organizations and journal sources. This offers an opportunity for future research to focus on this topic.

This paper aims to study the effect of knowledge management in formulating competitive strategies for knowledge-based small- and medium-sized enterprises (SMEs) in Malaysia.

A quantitative approach of a survey was carried out on 135 owners and managers of knowledge-based SMEs in Malaysia. Structural equation modeling technique was used to investigate the relationship between knowledge management and competitive strategies. SmartPLS software is used to analyze the quantitative data. Only SMEs which are involved in R&D and innovation were selected to get the right respondents who meet the objective of the study.

The findings show mixed results. Most dimensions of knowledge management have significant relationships to differentiation strategy except for knowledge creation and knowledge acquisition, with only knowledge acquisition showing a significant relationship to cost leadership. Findings reveal that knowledge management has a positive effect on competitive strategies with more inclination toward differentiation strategy, compared to cost leadership strategy which does synchronize with their commitment in research and development and innovation.

This study is only focused on knowledge-based SMEs in central Malaysia. Second, the use of a survey approach minimized the flow of information.

SMEs do have knowledge management practices but may not be exploiting it well. Mapping knowledge management practices would help SMEs identify their strengths and weaknesses to explore better business opportunities. This proves that SMEs are leveraging their resources through knowledge application, dissemination, storage and protection to be different than their competitors. However, their apparent lack of knowledge in knowledge acquisition and knowledge creation should be addressed accordingly, as it is important for their future continuous sustainability.

This paper contributes to the literature of knowledge management relating to competitive strategies in SMEs. The study offers insights on how competitive strategies were formulated through knowledge management. The mixed results reveal a new different outlook of knowledge management relating to competitive strategies.

This study aims to empirically analyze the symmetries and asymmetries among the critical factors affecting building information modeling (BIM) implementation between countries with different income levels. To achieve that aim, the study objectives are to identify: critical factors affecting BIM implementation in low-, lower-middle-, upper-middle- and high-income countries; overlapping critical factors between countries with different income levels; and agreements on the critical factors between countries with different income levels.

This study identified potential BIM implementation factors using a systematic literature review and semi-structured interviews with architectural, engineering and construction (AEC) professionals. Then, the factors were inserted into a questionnaire survey and sent to AEC professionals in Afghanistan, India, Malaysia and Saudi Arabia. The collected data was analyzed using the following techniques and tests: mean, standard deviation, normalized value, Kruskal–Wallis, Dunn and Mann–Whitney.

Five critical factors overlap between all countries: “availability of guidelines for implementing BIM,” “cost-benefit of implementing BIM,” “stakeholders’ willingness to learn the BIM method,” “consistent views on BIM between stakeholders” and “existence of standard contracts on liability and risk allocation.” Also, the criticality of the factors often differs between income levels, especially between low- and high-income countries, suggesting a significant gap between low- and high-income countries in BIM implementation.

This study differs from prior works by empirically analyzing the symmetries and asymmetries in BIM implementation factors between countries with different income levels (i.e. low-, lower-middle-, upper-middle- and high-income countries).